Installation Of Limit Switch - Comunello Automation FORT 400 Manual Del Usuario

• Run a few manual gate opening/closure cycles, checking that the rack - pinion coupling has a constant clearance and that there is no abnormal
friction that may overload the gearmotor (FIG. 10).
FIG. 10

4.3.2 INSTALLATION OF LIMIT SWITCH

ELECTROMECHANICAL LIMIT SWITCH
• Manually move the gate into the opening position, stopping it at a distance of 30 mm from the mechanical stop (FIG.11).
FIG. 11
COMUNELLO ®Copyright 2020 - All rights reserved
3 0
m m
29