Commissioning; Maintenance; Spare Parts; Disposal - Comunello Automation FORT 400 Manual Del Usuario

6 COMMISSIONING

Each single element of the automation, for example the safety edges, photocells, emergency stop, etc., requires its own commissioning;
for these devices, the procedures reported in the respective instruction manuals must be carried out. For FORT commissioning, perform
the following sequence of operations:
• Check that all the instructions in this manual have been strictly followed, in particular those in chapter 1, "General warnings".
• Using the supplied control or stop devices (key-operated switch, control buttons or radio transmitters), test gate opening, closure and stoppage
and check that the gate acts as expected.
• Check the correct operation of all safety devices in the system one by one (photocells, safety edges, emergency stop, etc.).

7 MAINTENANCE

Maintenance must be regularly carried out by qualified personnel in accordance with legal and regulatory provisions in force. For
FORT, routine maintenance must be carried out at most within 6 months or 10,000 manoeuvres after the last servicing.
• Disconnect all sources of power from the motor.
• Check and replace all worn moving parts.
• Check the condition of all components making up the automation.

8 SPARE PARTS

Spare parts can be ordered when needed by contacting the technical department.

9 DISPOSAL

Certain parts of the product can be recycled, while others, such as the electronic components, must be disposed of according to
legislation in force in the area of installation.
A number of components may contain pollutants that must not be released into the environment.

10 WARRANTY

10.1 - This warranty supplied as part of commercial dealings or the sale of goods for professional use, is limited to the repair or
replacement of Product parts recognised by FRATELLI COMUNELLO SPA as defective with equivalent repaired Products (hereinafter
"Standard Warranty"). The warranty does not cover the costs incurred by the repair and replacement of materials (for example, cost of
labour, material rental, etc.).
10.2 - The provisions contained in articles 1490-1495 of the Italian Civil Code do not apply.
10.3 - FRATELLI COMUNELLO SPA warrants that the Products are in good working order within the limits indicated in the previous sub
point 1. Unless otherwise agreed, the Standard Warranty is valid for a period of 24 (twenty-four) months from the date of production,
indicated on the Products themselves. The Warranty is valid and binding for COMUNELLO only if the product is correctly assembled and
serviced in accordance with the rules of installation and safety indicated in the documentation provided by COMUNELLO or in any case
available on the website http://www.comunello.com/it/corporate/condizioni-generali/
10.4 - The warranty does not cover: faults or damage due to transportation; faults or damage caused by defects in the electric supply
system installed at the premises of the purchaser of the Product and/or negligence, inadequacy or improper use of that system; faults
or damage resulting from tampering on the part of unauthorised personnel or as a result of incorrect use/installation (in this regard, we
recommend that the system be serviced at least every six months) or utilisation of non-original spare parts; defects caused by chemical
agents and/or atmospheric conditions.
The warranty does not cover the cost of consumables, in any case COMUNELLO accrues credit for the intervention carried out at the
client premises, in the event the latter proves useless because the warranty was no longer valid or because the client had used the
COMUNELLO product in a negligent, careless or inexperienced manner, such that correct use of the product would have prevented the
need for installation.
10.5 - Implementation of warranty: unless otherwise agreed, the right to claim under the Standard Warranty is exercised by submitting a
copy of the purchase document (tax invoice) to COMUNELLO. The Client must report the defect to COMUNELLO within a period of 30
(thirty) days from its discovery.
Action must be taken within the statutory limitation period of 6 (six) months from the date of discovery. The parts of the Product for which
a claim is made under the Standard Warranty must be sent by the Client to FRATELLI COMUNELLO SPA, Via Cassola 64, 36027 Rosà
(VI) – Italy.
10.6 - The Client cannot claim compensation for consequential damage, loss of profit, loss of production and in any case cannot claim for
sums higher than the value of the supplied components or Products. All expenses relating to the transportation of Products to be repaired
or repaired, even if covered by the Standard Warranty, shall be borne by the Client.
10.7 - No external operations carried out by COMUNELLO technical personnel is covered by the Standard Warranty.
10.8 - Specific modifications to the terms of the Standard Warranty described herein may be established by the parties in their sales
agreements.
10.9 - In case of legal disputes of any nature, Italian law shall apply and the competent forum shall be the Court of Vicenza.
34 COMUNELLO ®Copyright 2020 - All rights reserved