Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
The unit has four operating modes: AUTO mode, ECO mode, FAST mode and MULT mode. There
are four ways to make hot water in the unit: heat pump, auxiliary electrical heater, solar energy and
boiler. Under different modes, hot water is heated by different way, as shown in the following table:
Operating
No.
Mode
1
AUTO
2
ECO
3
FAST
4
MULT
When first time power on at initial status, the controller is default with off status. Press the
on the unit, the current working mode is AUTO mode, initial set temperature is 55℃(parameters F9), press the
button to adjust the temperature, press the
and work according to memory when power on again after power off.
The controller panel shows the temperature of the upper part of the tank, that is, the
actual
water outlet temperature.
For auto mode, It work with heat pump and with/without E-heater based on condition. If the ambient
temperature and Max.water out temperature is at continuos line, then unit work with eco mode, with only
heat pump, the e heater not work; if not in continuos line, E heater work automatically, unit work with both
heat pump and E heater.
V.2
5.Operating Instruction
Hot Water Heating Way
Heat Pump
E-Heater
●
●
●
●
●
●
●
button to change the mode. The controller can record the current setting,
45
Solar
Boiler
Energy
●
●
●
●
●
●
button one time to switch
or
Publicidad
Capítulos
Tabla de contenido
