EAS ELECTRIC E300WHF Manual De Usuario página 48

8. Special date timing
Long pressing the
every one second, and the 7 numbers correspond to the 7 days of the week. When the
button is released, the corresponding date time setting can be started. The setting method is the same as weekly
timing setting.
9. Holiday setting
Press button to enter into the holiday start date setting, at this moment 1~3 is bright, hour and
minute blink with display 20:18, press
enter into month setting, at this moment hour blink, press
adjustment completed, press
adjustment completed, press
and minute blink with display 20:17, the setting method is same with holiday start date setting.
After the holiday close date setting completed, "temperature" blink to set temperature,
initial is "--：--"which means the unit is off when holiday start. If use press
temperature, then unit work with set temperature when holiday start. After temperature is setted,
press button to exit the setting. If the holiday setting is successfully, then
This function is one time timing, after setting successful, the unit will work according to the set
requirements: The unit will execute the shutdown command at 23:00 on the vacation start date. And the unit
will execute the switch on command at 01:00 on the vacation finish date (according to the parameters before
shutdown).
V.2
5. Operating Instruction
button for more than 3 seconds. The digital light will be light from number 1 to 7 cyclically
and
to enter into date setting, press
to enter into holiday close date setting, at his moment 4~7 is bright, hour
to adjust year. After adjustment completed, press
and
48
button is released, when the
to adjust month. After
and to adjust date. After
button to set
is bright.
to