Introduction; Intended Use; Features - Parkside PDFW 120 A2 Traducción Del Manual De Instrucciones Original

DOUBLE BENCH GRINDER
WITH FLEXIBLE DRIVE SHAFT
PDFW 120 A2

Introduction

Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.

Intended use

This appliance is designed for milling, polishing,
cleaning, grinding and cutting various materials. It
is suitable for the grinding of hard materials such
as hard metals, cast iron, HSS, ceramics and glass
as well as soft materials such as copper, aluminium
and plastics. It can also be used for tough materials
such as unhardened steel, welds, hardened steel
and titanium. The appliance is not intended for
commercial use. Any other use of or modification
to the appliance is deemed to be improper and
carries the risk of serious personal injury. The manu-
facturer accepts no responsibility for damage(s)
attributable to misuse.
│ GB │ IE
■ 2

Features

see illustration on fold-out page
Eye shield
Buffing disc*
Locking nut
Connecting thread
Flexible shaft
Black collar
Collet chuck mount
Speed control
ON/OFF switch
Knurled screw
Tool rest
Grinding disc*
Accessory set (see fig. A)
5 milling cutters
4 cleaning brushes
3 brass brushes
10 pencil grinders
5 abrasive belts Ø 15 mm
Work arbor for abrasive belts Ø 15 mm
5 abrasive belts Ø 9 mm
Work arbor for abrasive belts Ø 9 mm
3 collet chucks (2.0 - 2.4 - 3.2 mm*)
Dressing stone
Combination spanner
Work arbor for polishing felts
5 polishing felts Ø 25 mm
5 polishing felts Ø 13 mm
Polishing paste
40 cutting discs Ø 24 mm
12 cutting discs Ø 32 mm
Work arbor for cutting discs
Fig. C
Mounting screw for eye shield
Spark deflector
Mounting screw for spark deflector
PDFW 120 A2