Rules For Safe Operation; To Adjust Airflow Upward Or Downward - Orient HV-20D Guia De Inicio Rapido

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ASSEMBLY AND OPERATING INSTRUCTIONS
CAUTION
Read and follow all instructions before operating fan.
DO not use fan if any part is damaged or missing.
WARNING
To reduce the risk of fire or electrical shock, do not expose to water or rain.
To reduce the risk of fire or electrical shock, do not use this fan with any solid state speed control device.
This appliance has a 3-prong plug. To reduce the risk of electrical shock, this plug is intended to fit in an outlet only one way.
If this does not fit the outlet, contact a qualified electrician. Do not attempt to bypass this procedure.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order
to avoid a hazard.

RULES FOR SAFE OPERATION

Never insert fingers or any other objects through the grill guard when fan is in operation.
Disconnect the fan when moving from one location to another.
Disconnect the fan when removing guards for cleaning.
Be sure fan is on a stable, flat surface when in operation.
DO NOT use fan in windows. Rain and moisture may create electrical hazard.
CAUTION:
Do not alter the Fan's assembly.
WARNING:
Be sure FRONT and REAR GUARD screw are completely screwed down in locking position before operation.
TUBE BASE ASSEMBLY INSTRUCTIONS
1.
Press the spring button of short pipe of fan and slide into the V-shape
stand until spring button fitted completely into the oval hole.
2.
Slide another short pipe into the V-shape stand same way as above No.1.
NOTE: Make sure both spring buttons are secured
inside oval holes before fan operation.
OPERATING INSTRUCTIONS
This fan comes fully assembled. No further assembly is needed.

TO ADJUST AIRFLOW UPWARD OR DOWNWARD:

used alone or in conjunction with air conditioning. Rotating the fan head upward serves to pull air from the floor and circulate it
throughout the entire room. This fan comes fully assembled. No further assembly is needed.
Tilt fan head to the desired angle. This high velocity fan can be
2
Spring
button

Publicidad

Tabla de contenido
loading

Tabla de contenido