Star Wars JAKKU SCAVENGER Manual Del Usuario

BATTERY
INSTALLATION
9 v
1604AU/
6LR61
Batteries not included
Requires 1 x 9V 1604AU/6LR61
OPERATION
• First, hold the Metal Detector so the magnetic coil is up in the air and away from any metal objects.
• To turn on and calibrate the metal detector, turn the sensitivity dial on (you will hear a sound) and then all the way up. Once you
have reached the maximum sensitivity, it will make a loud detection noise. Turn back the dial slowly until the sound stops. Stop
turning the dial as soon as the sound stops. The metal detector is now calibrated and ready for use.
• To detect metal objects, sweep the metal detector over it and within 1 to 3 inches of the object. Try large metal objects as well as
smaller metal objects.
• When searching, always use a gentle sweeping motion. The changing electromagnetic field as it moves through metal objects is
what activates the lights and sounds.
• The Jakku Scavenger Metal Detector is NOT for use in water.
SEARCHING
Inside: Search in hidden corners and in places where people sit.
•
Outdoors: It's easiest to search when the ground is soft and a little wet, like after a rain storm or at the beach. Wet ground is a
•
better electromagnetic conductor than dry ground, making it easier to find buried metals.
• Nighttime: The Jakku Metal Detector has a built-in LED light which is perfect for explorations at night or in locations with little to no
light. This can be especially fun when hiding and finding the scavenger targets.
• Test your skills – and your friends' – by hiding and searching for the objects in your scavenger targets.
• Ask yourself about things you find: Who did it belong to? Why was it dropped here? When? Is it stamped with a date?
What other clues are nearby, and what do they reveal?
• Record what you find and your ideas about the story they tell.
BE RESPONSIBLE
• Always ask permission from the property owner before you search on private property.
• Parks and public areas: Check first to make sure that metal detecting and digging are allowed.
• Always cover any holes that you dig.
• Never dig at historical sites, unless you have permission. Metal detector operators who respect the
past mark their finds and leave the digging to archaeologists, who know how to dig very carefully
and identify all the clues from the past.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE - DO NOT DISCARD
Questions? Go to unclemilton.com
BATTERY SAFETY INFORMATION
• Non-rechargeable batteries are not to be recharged.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.
• Do not mix old and new batteries.
• Only batteries of the same or equivalent type as recommended are to be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
• Dispose of batteries safely. Do not dispose of in a fire as batteries may
explode or leak.
• Rechargeable batteries are only to be charged under adult supervision.
• Rechargeable batteries are to be removed from the toy before being charged.
This product and its
batteries must be disposed
of separately at your local
waste recycling center.
Do not dispose them in your
household waste bin.
WARNING! Not suitable for children under 36 months.
Small Parts. Choking hazard
JAKKU
METAL DETECTOR
Many scavengers visit the planet Jakku in search of parts that can be
salvaged and sold. On Earth, a metal detector makes it exciting to hunt for
buried treasures – even if it's just for fun. Very old found objects can also
provide an inspiring link with the past.
ON/OFF
SENSITIVITY
DIAL
On
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions : (1) this devise may not cause harmful interference, and (2) this devise
must accept any interference received, including interference that may cause undesired
operation.
WARNING: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital devise, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
SCAVENGER
™
USE OF
SCAVENGERS
TARGETS
Be sure to place metal
treasures inside such as
coins, paper clips or
ASSEMBLY
other metal objects.
On / O
Sensitivity
Switch
Speaker
Magnetic
Coil
MANUFACTURED BY UNCLE MILTON
301 YAMATO RD, SUITE 2112, BOCA RATON,
FL 33431 USA
© 2017 TBDUM, LLC DBA UNCLE MILTON,
all rights reserved .
® and TM designate trademarks of Uncle Milton
MADE IN CHINA
© & ™ Lucasfilm Ltd. All rights reserved.
15219-0250-0817-V01
15219
One-time
Snap Fit
One-time
Snap Fit