Worx WX473 Manual Del Usuario página 9

SYMBOLS
To reduce the risk of injury, user
must read instruction manual
Warning
Double insulation
Wear eye protection
Wear ear protection
Wear dust mask
Waste electrical products should
not be disposed of with household
waste. Please recycle where
facilities exist. Check with your local
authorities or retailer for recycling
advice.
Laser radiation
Do not stare into beam
Jigsaw
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
INTENDED USE
The machine is intended for sawing wood,
plastic, metal and building materials while
resting firmly on the workpiece. It is suitable
for straight and curved cuts with mitre angles
to 45°. The saw blade recommendations are to
be observed.
1. ON/OFF SWITCH
Depress to start and release to stop your tool.
2. SWITCH LOCK-ON BUTTON
Depress on/off switch (2) then lock-on button
(1) (See Fig. A), release on/off switch first then
lock-on button second. Your switch is now
locked on for continuous use. To switch off your
tool just depress and release on/off switch.
3. VARIABLE SPEED CONTROL
Adjust the variable speed control to increase
or decrease the speed (See Fig. B) according
to the material, material thickness and blade
specification to be used (also possible during
no load operation). See Chart 1 for general
guidance on speed selection.
Avoid prolonged use at very low speed as this
may damage your jigsaw's motor.
Chart 1
Material
Wood
Metal
Aluminum
PVC
Ceramic
4. HAND GRIP AREAS
Always ensure you maintain a firm grip whilst
operating your jigsaw.
5. DUST COVER
When operating your jigsaw the dust cover
must be closed to allow the dust extraction
system to work efficiently. The dust cover can
Speed setting
5-6
3-4
3-5
3-4
3-5
EN
9