Tripp-Lite P130-000-AUD4K6 Manual Del Propietário página 4

Installation
Notes:
• Make sure all devices you are connecting are powered off prior to
installation.
• If the 3.5 mm port is in use, you will need to enable the stereo audio
function by adjusting the source's audio output setting to "PCM" instead
of "Auto".
1. Connect the HDMI source to the unit's HDMI input using an
HDMI audio/video cable.
2. Connect an HDMI monitor to the unit's HDMI output port using
a second HDMI audio/video cable.
3. Connect the unit to a set of speakers, an audio receiver or other
audio system equipped with 3.5 mm mini-stereo, TOSLINK, or
RCA digital outputs.
4. Use the included USB Micro-B cable to connect the unit to a
USB port on the display or a USB wall charger. The unit's green
power LED will illuminate to indicate it is receiving power.
5. Power on the connected devices. The orange LED will indicate
the unit is transmitting audio and video from the source to the
display and audio system.
17-11-395-933727.indb 4
4
1/24/2018 10:53:48 AM