Tripp-Lite T100-001-TST Manual Del Propietário página 9

DEBUG Mode
DEBUG Example #2:
The following are examples of potential LED
sequences on Pair 1-2 and possible fault conditions
for that pair only.
1st Short
Flash
1-2
1-2
1-2
1-2
1-2
1-2
1-2
Note: The above examples are for Pair 1-2 only. Similar
LEDs would relate to other pairs under test (short flash).
01-155-9337F4.indb 9
2nd Long Red Fault
Flash LEDs
1-2 No Red LED
None No Red LED
1-2 Reversal
1-2 Short
7-8 Miswire
7-8 Miswire,
Reversal
1-2 Split Pair
9
Fault Condition
Good Pair
Open Condition
Pair Reversed
1-2, 2-1
Pin 1 Shorted to
Pin 2
Pin 1 - Pin 7,
Pin 2 - Pin 8
Pin 1 - Pin 8,
Pin 2 - Pin 7
Wire from 1-2
twisted with wire
from another
pair, continuity
good
2/20/2018 9:59:41 A