Fitting And Removing The Hammock; Adjusting The Angle Of The Hammock; Using The Safety Armrest; Using The Hood - JANE TRIDER Instrucciones

4.- FITTING AND REMOVING THE HAMMOCK

Your TRIDER is fitted with the pro-fix system. With this sys-
tem, the TRIDER hammock can be attached perfectly to the
chassis. What's more, the hammock is reversible so it can be
positioned facing you or facing forwards.
To take the hammock off, simultaneously pull the unlocking
levers situated on both sides of the hammock.

5.- ADJUSTING THE ANGLE OF THE HAMMOCK

You can recline the hammock, to carry the baby in the most
comfortable position at all times.
To lower the backrest take hold of the strap found on the
back, with the red logo, and pull it downwards to the requi-
red position. 10.a
To raise the backrest pull the strap with the black logo
upwards. 10.b
WARNING: Only use the pushchair when the green dot is
displayed. Positions P1 and P2 simply make folding easier
and, together with position 11, must never be used with
your baby in the pushchair.

6.- USING THE SAFETY ARMREST

The safety armrest is designed to slot into casing on the seat.
24
8 - 9
11
If you want you can release just one side of the armrest by sim-
ply pressing the side buttons and the armrest will be fully hin-
ged by the other side. 12 -12.a
WARNING: The child should be kept away from the mobile parts
when the responsible adult is handling these. The appearance
of cutting, compression and pinch points are inevitable during
these operations.
WARNING: Never hold the pram or the hammock by the
protection bar, it is not a carrying handle.

7.- USING THE HOOD

To fasten the hood onto the frame of the hammock, slide it
from the top down to the corresponding slots on the central
part. Use the zip on the hood to attach it to the frame.
Follow the same steps in reverse order to take the hood off.

8.- ADJUSTING THE HANDLEBAR

The handlebar can be set to 7 different positions. Simulta-
neously press the buttons on both sides of the handlebar.
13 -13.a
14