Moving And Storage Instructions; Troubleshooting - Schumacher SP2 Manual Del Usuario

14. MOVING AND STORAGE INSTRUCTIONS

14.1 Store the charger unplugged, in an upright position. The cord will
still conduct electricity until it is unplugged from the outlet.
14.2 Store inside, in a cool, dry place.
14.3 Do not store the clips clipped together, on or around metal, or
clipped to cables.
14.4 If the charger is moved around the shop or transported to another
location, take care to avoid/prevent damage to the cords, clips
and charger. Failure to do so could result in personal injury or
property damage.

15. TROUBLESHOOTING

PROBLEM
Charger will
not turn on
when properly
connected.
CHARGING
(yellow) LED is
flashing.
CHARGED
(green) LED is
blinking.
POSSIBLE CAUSE
AC outlet is dead.
Poor electrical
connection.
Battery is sulfated.
The cable assembly
inline fuse may be
blown. Reversing the
connections at the
battery will cause this.
Battery is defective.
Indicates the charger
is in abort mode.
Battery has 80% of
charge or more.
• 13 •
REASON/SOLUTION
Check for open fuse
or circuit breaker
supplying AC outlet.
Check power cord and
extension cord for a
loose fitting plug.
Have battery checked.
Check the fuse. If it is
blown, replace it with
one of the same size
and rating.
Check the battery.
See "Aborted Charge"
in the OPERATING
INSTRUCTIONS
section.
No problem; this is a
normal condition.