Getac PS535F Manual Del Usuario página 4

Getting Your Device Ready for Use
Performing Initial Startup
1. To remove the battery cover, unfasten the
four screws using a tool such as a coin.
2. Fit the battery into place.
3. Replace the battery cover and tighten the
four screws.
4. Slide the ON/OFF switch to the ON
position.
5. Your device will automatically turn on.
Wait for a few seconds until the startup
screen appears. Follow the onscreen
instructions to complete the setup wizard.
You will then see the Home screen.
Connecting to AC Power and Charging the Battery
1. Fit the converter plug to the AC charger
( ).
2. Connect the DC jack end of the AC
adapter to your device ( ) and the
other end to a wall outlet ( ).
3. The multi-functional indicator glows
amber when charging is in progress. Do
not disconnect your Pocket PC from AC
power until the battery is fully charged.
This will take a couple of hours.
2
English