Oxygenics RAINBAR + BURST COMBO Guia De Inicio Rapido

R B
AIN AR
INSTALLATION:
STEP 1
Cover drain prior to
RainBar installation.
Remove mounting plate
from RainBar housing by
applying light pressure
and sliding mounting
plate from housing.
STEP 4
Remove your existing
shower head by turning
the shower head in
a counterclockwise
direction.
WARNING:
PROVIDED SCREWS MUST BE
UTILIZED IN INSTALLATION.
Oxygenics is not responsible for any
injury or damage resulting from
improper installation, use
removal of the RainBar.
USING THE DIVERTER
To change the shower spray: Place your index
finger on one lever and your thumb on the other
lever and rotate either clockwise
or counter clockwise
(depending on the current
position) until you feel it click
into place.
+ B
URST
DRYWALL / TILE WITHOUT STUD
STEP 2
Place the mounting plate
on ceiling with the "A" side
facing down and toward
the shower wall above the
shower arm, then mark
the hole guides near the
mounting plate's "A" and
"B" sides using a pencil.
"A" SIDE
TOWARD
SHOWER WALL
SHOWER
WALL
STEP 5
Remove any remnants of
old plumber's tape and
flush out shower pipe for
5 to 10 seconds.
ATTENTION:
WASHERS PRE-INSTALLED
IN HOSE ENDS
Washers must be inserted into
both hose ends for proper
††
, or
EASY TWIST SPRAY
SELECTION
Enjoying multiple spray patterns
during your shower has never
been easier. With the Burst's
easy twist design, simply rotate
the easy spray selector for a
quick spray change.
C
OMBO
STEP 3
Using included 30" hose,
place end of hose to the
marked hole location
closest to the shower
wall and place the other
end of the hose near the
end of the shower arm
to ensure hose will reach
when installed.
STEP 6
Wrap plumber's tape
clockwise 3 or 4 turns
around threaded end of
shower arm.
installation.
WHAT'S INCLUDED
RAIN SHOWER
HANDHELD SHOWER
RAIN BAR
30" STAINLESS STEEL HOSE
3-WAY DIVERTER
72" STAINLESS STEEL HOSE
HOLLOW WALL ANCHORS WITH 1.5" SCREWS
(2 SETS REQUIRED FOR INSTALLATION)
WALL MOUNT AND INSTALLATION KIT
HEX KEY
MASONRY DRILL BIT
PLUMBER'S TAPE
ADDITIONAL TOOLS NEEDED*
EYE PROTECTION †
PENCIL
POWER DRILL
PHILLIPS SCREWDRIVER
RUBBER MALLET
*Not included.
†Eye protection must be worn during installation.
††RainBar is intended for use with a shower head only. No other objects
should be installed or hung from the product.
STOP!
NEED HELP?
PLEASE DO NOT RETURN THIS
PRODUCT TO THE STORE.
If you need installation assistance, replacement
parts or have questions regarding our warranty, our
Customer Service team can be contacted by:
PHONE:
1-866-440-9257
775-420-5600
or
LIVE CHAT:
www.oxygenics.com
EMAIL:
support@oxygenics.com
ONLINE:
www.oxygenics.com/claims
Business hours:
Monday - Thursday 7:00 am to 5:00 pm PST
Friday 7:00 am to 4:30pm PST*
*Closed on all nationally observed holidays
1.35 GPM (5.11 L/min) or less.
For use with automatic
compensating valves rated at