Würth 0701 322 Serie Traducción Del Manual De Instrucciones De Servicio Original página 21

Intended use
This device has been designed for the sawing of
metal in an industrial or workshop environment. The
device is suitable for sawing the following materials:
• Standard steel grades (St37, St50, etc.)
• Special steel grades (C40, 18NiCrMo5, etc.)
• Aluminium and aluminium alloys
• Brass
• Bronze
• Steel pipes (St35, St52, etc.)
The device is not suitable for the sawing of wood or
similarly soft materials.
The device has been designed and built
for dry cutting. The use of cooling lubricant
could irreparably damage the device.
Any other use or use outside this scope is considered
improper use.
The user alone is responsible for damage
resulting from improper use.
Symbols on the device
Symbol Meaning
Read the operating instruc-
tions
Protect the appliance from
rain. Do not hose it down
or clean it with a steam or
water jet
Check the device, cable and
plug for defects before you
start working. All repairs
must be carried out by
specialist technicians.
Wear protective glasses
Wear suitable hearing
protection
Wear suitable protective
gloves when changing the
saw band
Symbol
Device elements
Overview
1 Machine frame
2 Lever for rapid vice guiding (only PBS 160)
3 Vice handle
4 Vice
5 Saw band
6 Hand wheel for the adjustment of the saw band
tension
7 Handle (only PBS 105)
8 Swivelling housing
9 Motor
10 Main motor switch
11 Swivel bearing
12 Adjustable stop
13 Locking pin (only PBS 105 and PBS 120)
14 Clamping screw for stop
15 Guide rod
16 Lock nut
17 Stop
18 Clamping lever for mitre cutting
19 Cutting angle indicator
20 Clamping lever for saw band guide
21 Nuts
22 Adjustable saw band guide
23 Electronic speed controller
24 Switch
25 Stud
26 Rotary knob
27 Handles (only PBS 160)
28 Release button (only PBS 120 and PBS 160)
29 Fastening screws
30 Pawl (only PBS 120-A and PBS 160-A)
31 Selector switch
32 Automatic switch (only PBS 120-A and PBS 160-A)
Fig. IV
PBS 105
PBS 120 / PBS 160 Electronic version
PBS 120-A / PBS
160-A
Meaning
Do not reach into the cutting
area with your hands or us-
ing objects while the device
is running
Version with two speeds
Version with automatic
cutting
21