Environmental Instructions; Troubleshooting - Würth DSN 160 Traducción Del Manual De Instrucciones De Servicio Original

Environmental instructions

Do not dispose of this device with
household waste. Dispose of the
device via an approved waste
disposal company or via your
local authority waste disposal
facility. Observe the currently valid
regulations. In case of doubt,
contact your waste disposal facility. Dispose of all
packaging in an environmentally compatible
manner.
Fault
No nails are driven in
Nails break during
driving in
Nails are not driven fully
home
Nails jam when driving
in
26

Troubleshooting

Possible cause
Incorrect fasteners
Adhesive residues or wood dust in the
magazine
Insufficient compressed air supply
Nail guide to the driver is not adjusted
correctly
Incorrect fasteners
Air pressure too low
Driver worn or broken
Incorrect depth adjustment
Incorrect fasteners
Nail guide to the driver is not adjusted
correctly
Worn driver tip
Remedy
Ensure fasteners are the correct size
Clean magazine
Ensure an adequate compressed air
supply
Use the correct size of fastener
Use the correct size of fastener
Ensure an adequate compressed air
supply
Contact an authorised Würth customer
service centre.
Set the depth adjuster to the desired
position
Use the correct size of fastener
Use the correct size of fastener
Contact an authorised Würth customer
service centre.