hafele Dialock WT2000 Instrucciones De Montaje Y De Servicio página 24

The connection between the reader and the control units can be made
using a standard 4-core cable. We recommend using a standard electrical
cable J-Y(St) Y 2 x 2 x 0.8 with a maximum length of 50 metres LEGIC /
35 metres Tagit ISO.
When installing several wall terminals, ensure that the distance between
the reader units is at least 25 cm (fig. 7). If the distance is too low, the RF
fields may overlap. This may cause that transponder media are no longer
reliably detected.
Reader unit
A
B
C
D
Table 1
24 Wall terminal Dialock - status: 12.2006 - 732.29.125
125_WL_Buch.indb 24
Fig. 7
+5 V
GND
RS485 A
RS485 B
Mounting and Operating Instructions
05.12.2006 17:11:00