Tripp-Lite U442-DOCK13-S El Manual Del Propietario página 5

Installation
Notes:
• See Optional Accessories section for suggested cables.
• When the unit is connected to the USB-C port on your computer and to a network
via Cat5e/6 cabling, a network connection will automatically be established. If no
connection is made, one can be established manually by going to your computer's
network settings page. For example, when using a Mac, navigate to the Network
section found in System Preferences, click the 'Assist Me' button to get to the
Network Setup Assistant, then follow the prompts to establish a connection.
• If additional power is required for your installation, the U442-DOCK13-S is
compatible with user-supplied 5V DC power jacks equipped with a 3.5 x 1.35 x
9.5 mm output plug with a positive tip and negative sleeve.
1. Connect the built-in USB-C cable to USB-C port on your laptop, tablet or
other device.
2. Use an HDMI cable to connect a monitor or display to the unit's HDMI
port.
3. Connect a USB peripheral to the unit's USB-A and USB-C ports.
4. For an Ethernet connection, use Cat5e/6 UTP cable to connect to the
unit's RJ45 port.
02-412-9337BE.indb 5
5
3/8/2018 9:22:37 A