Important - LauraStar COMPACT Instrucciones

MDE Compact 27.8.2001
Safety and storage
Even when it is hot, the iron, can be stored with the mains cord and the monotube in the storage box under the iron-
ing board.The danger of being burnt or tipping over the hot iron is therefore avoided.The storage box is fitted with two clip hooks
that ensure the lid is firmly closed.
Storage
After using the unit: 1. Switch off the switches and remove the mains plug from the wall socket. 2. Open the lid. 3. Place the fol-
lowing items in the storage box in this order: a) the iron. b) the monotube. c) the mains cord. d) the silicon mat. If the iron is still
hot be careful not to touch the plastic parts of the storage box.
Note: you can now store the unit even if the iron is still hot.
Ensure that the storage box lid is correctly fitted in order to avoid an accident if the unit is tipped over.
1. Tip the board with the point of the board facing downwards. 2. Depress the height adjustment lever to release the catch.
3. Close the board.Your unit is now ready for storage.
Note: You can leave water in the steam generator until the next ironing session. Once it has boiled the water does not
change in any way.
Maintenance
Cleaning the iron
IMPORTANT: Do not use a de-scaler or other chemical product as they may damage the steam generator and the iron. Do not immerse
the iron in liquid of any sort. Do not hold the iron under running water from the tap.
16:08 Page 35
Use our Poli-Fer cleaning cloth which you can obtain from your supplier.
Clean the soleplate more often if you use starch when ironing
(even if the starch deposit is not visible).
7