Tripp-Lite B136-101 El Manual Del Propietario página 6

Extender/Splitter Installation
Make sure the A/V source is powered OFF.
1
Connect the source to the ports on the B136-004
2
labeled SOURCE using Tripp Lite A008-Series
Component Video and A050-Series Stereo
Audio Cables.
Optional: Connect a local A/V device to the ports
3
on the B136-004 marked LOCAL using Tripp Lite
A008-Series Component Video and A050-Series
Stereo Audio Cables.
Connect the external power supply to the
4
B136-004 local unit and plug it into a Tripp Lite
Surge Protector, PDU or Uninterruptible Power
Supply (UPS). The red LED will illuminate to
indicate power is being received from the external
power supply.
Using Cat5e/6 cable, connect one of the RJ45 output
5
ports on the B136-004 to the RJ45 input port on the
B136-100 or B136-100-WP-1 remote unit.
Repeat step 5 for each additional remote unit you
6
are connecting.
Connect the B136-100 component video and
7
stereo audio connectors to the A/V device, or
connect the B136-100-WP-1 to the A/V device
using Tripp Lite A008-Series Component Video
and A050-Series Stereo Audio Cables.
Repeat step 7 for each additional A/V device you
8
are connecting.
Turn on the power to the A/V source.
9
6