Hayward AquaRite LT Manual Del Usuario página 29

The device is designed to be connected to a protected outlet at all times. The AquaRite LT must not be disconnected unless the pool
equipment is undergoing maintenance or the pool is to be closed (wintering).
Assuming that the chemical balance of the water is within the recommended ranges, the device can be started up.
Configuration
Red = Communication fault
Settings
1
OK
6
OK
12
OK
Page 12 of 16
Time
Electrolysis
Production intensity in gr/h
Automatic measuring
pH / Salt
Communication
2
OK
7
13
3 Settings: preferred language.
5
Settings: date and time.
7
Settings: screen lighting intensity (0-100%) and
screen timed On/Off programming.
9
Sound: Programming the sound transmission system
for the following functions: Keyboard (press a key),
Pop-ups (urgent messages), Alerts (operational
alarm), Filtration (start of filtration).
USE ONLY GENUINE REPLACEMENT PARTS
OPERATION
25º
12:30
electrolysis
22
Pol 1
Cover
Low
gr/h
measures
7.2
7.5 OFF
pH
FL1 AL3
3.2
Sal 15/01/16
g/l 25°C
3
8
OK
AquaRite LT
Water temperature
Polarity 1 Polarity 2
Pol 1 Pol 2
Production automatically reduced
Cover
to % selected (20% by default)
Wait time
---
Insufficient salt / cell scaled up or to be replaced /
LOW
water temperature too low
Filtration stopped or insufficient flow
Flow
Max. pH set point (Acid)
7.5
Peristaltic pump operation
ON/OFF
Maximum injection time reached
AL3
Filtration stopped or insufficient flow
FL1
Date of the last salinity measurement
15/01/16
Water temperature
25°C
Salt concentration
3.2
3 4
OK
9 10
OK
11 Password: Protects access to the user menu by
activating a password. To enter your password, press a
5-key combination to be memorized by the system.
13
System info: Information about the software
version available on the TFT screen and the Power
module. The system records the run-time count for the
different modules and displays it on this screen.
( Alarm reset)
5
11
Rev. A