Operating Your Wine Cooler; Recommended Temperature Settings; On/Off Power; Control Panel Lock - Fagor FSV-144US Manual De Instrucciones

OPERATING YOUR WINE COOLER

It is recommended you install the wine cooler in a place where the ambient temperature is between
19ºC-24ºC (66ºF-75ºF). If the ambient temperature is above or below recommended temperatures,
the performance of the unit may be affected. For example, placing your unit in extreme cold or hot
conditions may cause interior temperatures to fluctuate. The range of 4ºC-20ºC (39ºF-68ºF) may not
be reached.

RECOMMENDED TEMPERATURE SETTINGS

Red Wine: 15℃-- 18℃ / 58°F -- 65°F
White Wine: 9°C -- 14°C / 48°F -- 57°F
Rose Wine: 10°C -- 11°C / 49°F -- 51°F
Sparkling Wine: 5℃-- 8℃ / 40°F -- 47°F

ON/OFF POWER

To turn ON/OFF the appliance, push and hold the button for 3 seconds.

CONTROL PANEL LOCK

Your wine cooler is equipped with an automatic control panel lock function. This function will prevent
any unwanted changes to your temperature or power settings. The lock function will activate
automatically 12 seconds after the last time a button is pushed on the control panel.
To unlock the control panel lock, press and hold both the buttons for 3 seconds, the control
panel will beep and blink once indicating that the control panel is active and the settings can be
changed. You must unlock the control panel every time you want to set the temperature, change the
display setting (°F - °C) turn on or off the light and to power off the cooler.

SETTING THE TEMPERATURE CONTROL

You can select temperature display setting from Fahrenheit to Celsius degree by touching the
button. Fahrenheit or Celsius degrees indicator will appear in the temperature display window.
If you desire to change the temperature, set the temperature as you desire by touching the or
button. The temperature that you desire to set will increase 1ºF or 1ºC if you touch the button
once; on the contrary the temperature will decrease 1ºF or 1ºC if you touch the button once.
NOTE: If the unit is unplugged, if the power is lost, or turned off, you must wait 3 to 5 minutes before
restarting the unit. If you attempt to restart before this time delay, the wine cooler will not start.
When you use the wine cooler for the first time or restart the wine cooler after having been shut off for
a long time, there could be a few degrees variance between the temperature you select and the one
indicated on the LED readout. This is normal and it is due to the length of the activation time. Once
the wine cooler is running for a few hours everything will be back to normal.

INTERIOR LIGHT

To turn the interior light ON or OFF, unlock the control panel then press the button. The light will
be turned off automatically if it remains ON for 10 minutes. To turn it on again, unlock the panel then
press the button again and the light will turn back on.
8