Olympus STF-8 Manual De Instrucciones página 20

5
Slide the latch on the controller
in the direction opposite to that
indicated by the [LOCK ►] icon
( 1 ).
6
Attach the controller to the
camera's hot shoe ( 2 ).
• Insert it fi rmly all the way into the hot
shoe until it clicks into place.
7
Slide the latch to the [LOCK ►]
position ( 3 ).
8
Install each light-emitting part in its
respective joint.
• Insert it fi rmly all the way into the joint
until it clicks into place.
• When removing the light-emitting part,
pull it out while pressing the UNLOCK
button.
This completes the installation.
20
EN
2
1 3