Olympus STF-8 Manual De Instrucciones página 21

Fixing the Irradiation Angle Fixing the Irradiation Angle
1
Adjust the positions of the
light-emitting parts by moving
them along the lens ring while
holding down the buttons on
the sides of the joints.
• Release the buttons to fi x the
position.
• It is possible to move 360° around
the lens ring.
2
Adjust the angle of the light-
emitting part.
• The light-emitting part can be
adjusted up and down to the
angles shown in the fi gure.
• The illumination may be insuffi cient when taking very close-up photos with a wide-
angle lens or macro lens. In this case, use the diffuser.
g "Using the diffuser" (P. 25)
60°
40°
21
EN