KNOVA KN 8059 Manual Del Usuario página 6

6. LCD Screen
Max Display 3999
7. INPUT Terminals
Input positive terminals for all measurements except current measure
ments, connected with red test leads.
8. COM Terminals
Input common terminals for all measurements except current mea
surements, connected with black test leads.
9. Hz% Frequency and duty Switch Button
Under AC voltage measurement, press Hz% button to select a function
from voltage, frequency to duty.
10. SEL: Function selecting button
In voltage mode, press the SEL button to toggle from DCV to ACV;
in mode, it is used to select a function from resistance, capaci
tance, diode to continuity.
11. Back light
Press the " " button more than two seconds to turn on the back light,
press again to turn it off.
12. Trigger
Press the lever to open the transformer jaws. When the pressure
on the lever is released, the jaws will close.
13. Transformer Jaws Lighting Bulb
Switch rotary switch to current position, then turn on lighting Bulb and
back light.
4