S&P RMB Serie Manual Del Usuario página 8

Wiring
Put the switch C (Fig. 2) to position 0. For
Access to the connection block, open the
EN
front cover "T" (Fig. 2). Carry out the wi-
ring as indicated in Fig. 4.
Maximum permissible currents
Type controller
RMB-1,5
RMB-3,5
RMB-5
RMB-8
RMB-10
PUTTING OUT OF SERVICE AND
RECYCLING
appropriate recycling bins. If your device
is also labeled with this symbol, please
take it to the nearest Waste Management
Plant at the end of its servicable life.
TECHNICAL ASISTANCE
• S&P's large Technical Service ne-
twork will guarantee satisfactory te-
chnical assistance.
• If a fault is observed in the unit, please
contact any of the mentioned technical
service offi ces and they will attend to
your problem.
• Any modifi cation of the appliance by
personnel not belonging to the Offi cial
8
Max. current (A)
1,5
3,5
5
8
10
EEC legislation and our
consideration of
generations mean
we should always recycle
materials where possible;
please do not forget to de-
posit all packaging in the
S&P Services will result in your gua-
rantee being void.
• For any queries regarding S&P pro-
ducts please contact any branch of our
After Sales Service network if you are
in Spain, or your regular dealer in the
rest of the world.
• To fi nd your nearest dealer, visit our
website at www.solerpalau.com
THE MANUFACTURER
BE HELD LIABLE FOR DAMAGES TO
PEOPLE AND/OR PROPERTY DUE TO
NON-COMPLIANCE WITH THESE WAR-
NINGS.
S&P RESERVES THE RIGHT TO MODIFY
THE PRODUCT WITHOUT PRIOR NOTI-
FICATION.
future
that
WILL NOT