3M Peltor ComTac MT20H682 N Serie Manual Del Usuario página 18

1.11 Repeat step 1.9 for the other guide, and fully attach the left cup. At this stage the earcups should look like in figure 1.11.
(1.11)
1.12 Attach the other helmet attachment to the right earcup as shown in figure 1.12-a and 1.12-b. Force will be required. NOTE: Push
or pull the earcup arm guide on the earcup as shown in figure 1.9 or 1.12. Choose the method that suits you the best. If you have
trouble attaching, the use of a gripping tool may be helpful.
(1.12-a)
Repeat step 1.12 for the other guide, and fully attach the right earcup. Upon successful installment the earcups should look like in
figure 1.12-c.
(1.12-c)
FP3849reva_6sidedcover_32sidedinsert_A5.indd 12
(1.12-b)
12
EN
2018-11-30 10:30:36