Publicidad
Idiomas disponibles
Idiomas disponibles
en
4 | 1 687 016 140 |
Use
In the accessory set 1 687 016 140, there are return
hose lines that are used in commercial-vehicle injectors
with internal connectors.
i
The return hose lines of this accessory set are
required only for the test kit CRI/CRIN 848H
(1 687 002 848) up to production date 10-2014.
Starting from production date 11-2014, the contents
of the accessory set are included in the scope of
delivery of the test kit.
Scope of delivery
Designation
Return hose line (4x)
Operating instructions
Operation
¶
See operating instructions 1 689 989 087.
i
The following connection diagram for EPS 708 (Fig. 1) or
EPS 815 (Fig. 2) is described using the example of the
injector "A". The return hose line must always be directly
connected to the injector. The connection of other injec-
tors (B, C, D, E and F) is identical. A mixed operation
with and without the return hose lines is not permitted.
¶
Connect the return hose line 1 680 712 371 (fig. 1
and 2, item 1) between the injector and the hose line
for the return flow.
1
458847-53_Ko
Fig. 1:
Connection diagram for commercial vehicle injectors on
EPS 708 (without high pressure connection)
|
1 689 989 242
2015-01-30
Order number
1 680 712 371
1
1 689 989 242
458847-05_Ko
Fig. 2:
Spare and wearing parts
Designation
Return hose line
Wearing part
<)
1 2
A
B
1
2
Connection diagram for commercial vehicle injectors on
EPS 815 (without high pressure connection)
<)
1.1
1.2
1
Order number
1 680 712 371
Robert Bosch GmbH
Publicidad
