Bond 52168 Manual Del Usuario página 6

ASSEMBLY INSTRUCTIONS CONTENTS
4. Attach the left rear leg (K) to the front leg (O)
using one M6x35mm black screw (EE). Secure
with one M6 black nut (BB). Tighten with a
Phillips screwdriver and the wrench (GG).
Attach the right rear leg (L) to the front leg (O)
using one M6x35mm black screw (EE). Secure
with one M6 black nut (BB). Tighten with a
Phillips screwdriver and the wrench (GG).
Hardware Used
BB
M6 Black Nut
M6x35mm
EE
Black Screw
GG
Wrench
5. Insert the axis (N) through the pre-drilled
holes in the left rear leg (K) and right rear
leg (L). Attach one wheel (M) to the axis (N).
Secure that side with one M10 nut (FF). Then,
attach the other wheel by duplicating this step
on the other side of the axis (N). Tighten with
the wrench (GG).
Hardware Used
FF
M10 Nut
GG
Wrench
6. Attach the handle (A) to the fire bowl (J) using
two M6x10mm black bolt (AA).
Then secure with two M6 wing nuts (HH).
Tighten with the wrench (GG).
Hardware Used
M6x10mm
AA
Black Bolt
HH
M6 Wing Nut
GG
Wrench
Page 6
4 4
EE
O
x 2
x 2
2 5
x 2
6
AA
x 2
x 2
A
K
L
BB
K
L
N
M
FF
HH
J