Beta 680/2,5 Instrucciones página 7

INSTRUCTIONS FOR USE ISTRUZIONI PER L'USO
ELECTRONIC DIGITAL TORQUE METER – DYNATESTER ART. 680/2,5
OPERATION MANUAL AND INSTRUCTIONS FOR ELECTRONIC DIGITAL TORQUE METER
MANUFACTURED BY:
BETA UTENSILI S.P.A.
Via A. Volta 18,
20845, Sovico (MB)
ITALY
Original documentation drawn up in ITALIAN.
CAUTION
PURPOSE OF USE
• measuring the driving torque to check settings or calibration, torque screwdrivers and wrenches
• right-hand and left-hand tightening.
• the Dynatester must not be used in humid or wet environments. Do not expose to heat, rain or snow
• the maximum capacity of the Dynatester must not be exceeded
• the Dynatester must not come into contact with chemical and corrosive substances
the Dynatester must not be used for any applications other than stated ones
WORK AREA SAFETY
Do not operate the Dynatester in environments containing potentially explosive atmospheres,
because sparks may be generated, which can ignite the dust or fumes.
Keep children away from the Dynatester.
Do not use the Dynatester in humid or wet environments; do not expose to rain. Humid and
contaminated environments result in an increased risk of electric shocks.
See installation diagram.
DYNATESTER SAFETY
• Before use, check that the Dynatester has not been damaged, and that no parts are worn.
• Do not force the electronic circuit of the Dynatester.
PERSONNEL SAFETY
of drugs, alcohol, or medication.
IMPORTANT! READ THIS MANUAL THOROUGHLY BEFORE USING THE
DYNATESTER. FAILURE TO COMPLY WITH THE SAFETY STANDARDS
AND OPERATING INSTRUCTIONS MAY RESULT IN SERIOUS INJURY.
EN I