SilverStone TREASURE Serie Manual De Instrucciones página 14

Ocultar thumbs Ver también para TREASURE Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 43
SILVERSTONE TS01B 2.5" RFID EXTERNAL ENCLOSURE
Q & A
Q.
What's the difference between plugging one and two USB connectors while using the USB double-headed
cable (Y type cable)? Is there any negative affect on plugging only one USB connector?
A.
For an external USB device, such as a hard drive, we provide a double-headed (Y type) USB cable
ensure the drive can obtain enough power for operation. Basically with our 2.5" external enclosure
products, you need to plug only one USB connector (the first one with main cable). Some computers
don't provide enough USB power, or some hard drive with high rotation speed may need more power;
in these situations you will need to use both of the connectors or even an external DC power supply.
Q.
What if I lost the RFID key?
A.
There are two RFID keys enclosed in the package, and you need to activate the two keys in the
encryption procedure the first time. If you lost one of them, you can still use another one to decrypt the
TS01B external disk as long as you have setup the encryption; but you cannot setup the encryption on
a new hard drive.
* The two keys are unique with your TS01B external enclosure, we cannot provide the third one if you
lost both of them. Your data will be locked in the hard drive and will be unable to access it. Please
backup data immediately if you lost the first key.
Q.
Can I install and encrypt another hard drive with TS01B RFID external enclosure?
A.
Yes you can, and the setup procedure is the same. But TS01B RFID enclosure supports at most three
different hard drives with RFID secure function, if you try to setup encryption on a fourth hard drive with
TS01B, it will give off a consistent "beep" warning sound and doesn't work. There will be no limitation
in using it as a normal external hard disk however.
* if you need to re-encrypt the hard drive, please delete and partition it again with other external enclosure,
then install it to the TS01B RFID external enclosure to setup the encryption. Please make sure to
backup all the important files before deleting and redoing partition.
12

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ts01b

Tabla de contenido