Antop AT-218B Instrucciones De Instalación página 3

LED Indicator
ON/OFF
!
2/ Setting and Scanning
In the TV's setup menu, set the mode to "Antenna" or "Air", then, set TV to "Scan" for channels.
Consult the TV manual for detailed instructions. Extend the rods and rotate them until get the
best picture.
The
Push the smart switch On or Off and select the switching
with which more channels are received.
Switch Off - The LED indicates
Switch On - The LED indicates
Scan channels after each switching in the Smartpass Amplifier
Smartpass Amplifier
2
CHANNEL SCAN
scanning for channels
must be powered in order to function.
yellow for normal
green for stronger
360°
reception.
reception.
2