ring should be placed on the left, in the hole
marked with a grey pictogram. Once in place,
both the whisks should have the same length. The
"click" indicates that the accessories are correctly
(Fig. 1)
in place.
• Place the stand (g) on the countertop.
- Insert the hand mixer on the swivel arm (h) until
it clips into place
- While holding the swivel arm unlock button (j),
tilt the swivel arm up using the hand mixer
(Fig. 6)
handle
- Insert the Easy spatula (m)
spatula automatically brings the ingredients
back to the mixing zone of the bowl for more
efficiency.
- Position the bowl (k)
- Unlock the arm to fold it by pressing the button
(Fig. 9)
(j)
• Plug in the appliance.
- Your appliance has 3 speeds and a turbo button.
Always start by mixing or kneading on position
1 then 2 and then 3 as the preparation thickens.
The speed of rotation of the bowl increases with
the hand mixer speed. Use the "Turbo" position
if the recipe requires higher power. We however
recommend that you use it only briefly.
• After completing the operation, turn the speed
selector to 0 position.
• Unplug the hand mixer.
• Tilt the swivel arm up by pressing the key (j)
• To remove the whisks or mixers, pull the eject ring
(Fig. 3)
(c) upwards
• Remove the bowl (k).
• While holding the hand mixer unlock button (i)
unclip the hand mixer (a)
• To store the power cord: pull the compartment
behind the hand mixer until you hear a "click",
wind the power cord and push the compartment
(Fig. 4)
back (f)
13
(Fig. 5)
(Fig. 8)
.
(Fig. 7)
. This
NEVER TURN ON
YOUR HAND MIXER
BEFORE LOWERING
THE SWIVEL ARM.