Troubleshooting - Harman Kardon SOUNDSTICKS III Guía De Configuración

SOUNDSTICKS
Specifications*
System
Frequency range: 44Hz – 20kHz
Power consumption: 4W idle, 65W
maximum
Subwoofer
Transducer (1): 6" woofer
Amplifier output power: 20W RMS
Dimensions (W x H): 9-3/16" x 10-3/16"
(232mm x 258mm)
Weight: 4 lb (2.2kg)
Satellite
Transducers (4): 1" full-range per channel
Amplifier output power: 10W RMS per
channel
Dimensions (W x H): 2" x 10"
(51mm x 254mm)
Weight: 1.5 lb (0.7kg)

Troubleshooting

Symptom
No sound from SoundSticks III
speaker system.
*These specifications are subject to change without notice.
4
III
®
Step 1. Place individual
SoundSticks® III (satel-
lites) beside monitor/
computer.
Possible problem
No power to subwoofer.
Power adapter plug not inserted
correctly.
No volume or low volume.
Step 2. Place subwoofer Step 3. Connect satellite
as desired, but place- cables to the dual
ment under your desk subwoofer cable. Also
will provide optimal connect the input cable
performance. to the subwoofer input
cable jack.
Solution
Ensure power supply is connected to live power source and is
properly connected to subwoofer. Please note: When subwoofer is
powered, a power LED should light.
Place plug with arrow symbol facing UP into the subwoofer.
Touch the volume "Up" (+) pad on the volume control satellite to
unmute and/or increase the system volume level.
Note: Touching the volume "Down" (–) pad lowers the system
volume. Touching both (+) and (–) volume control pads at the same
time will mute the system.
Step 4. Insert
SoundSticks III input
cable into the computer
or other audio device.