Warning And Safety Instructions - Miele A 312 Instrucciones De Manejo

en - Warning and Safety instructions
To avoid the risk of accidents and damage to this module please
read these instructions carefully before using it for the first time.
Keep these instructions in a safe place where they are accessible
to users at all times.
 Please also read the operating instructions for your washer-
disinfector and pay particular attention to the Warning and Safety
instructions.

The module is approved solely for the applications specified in the
"Areas of application" chapter of these operating instructions. Com-
ponents such as nozzles may only be replaced with Miele compon-
ents or genuine original spare parts.

Inspect all mobile units, baskets, modules and inserts daily as de-
scribed in the "Maintenance" section in the Operating instructions for
the washer-disinfector.

Only items which have been declared by their manufacturer as
suitable for machine reprocessing may be processed. The manufac-
turer's specific reprocessing instructions must be observed.

New load carriers must be cleaned in the washer-disinfector
without a load prior to first use.

Broken glass can result in serious injury when loading or unload-
ing. Broken glass items must not be processed in the machine.

Any hollow items that have become disconnected from their
injector nozzles, adapters or holders during processing must be
re-processed.

Only place empty, unloaded modules in baskets. Check that they
are correctly engaged before loading them.
Modules must be completely emptied before taking them out.
Placing loaded modules in baskets or removing them can cause
damage to the wash load and cause injury should glassware be
broken.

The reprocessing result must be checked as necessary using a
suitable test method and not just by a visual check.
27