Operation - Panasonic JS-950 Serie Manual De Usuario

2. Operation

■ AC Cord Kit Installation
1. How to install the AC Cord
(1) Carefully lay the Main Body Unit on a clear, flat surface as shown in figure (1).
(2) Unpack the AC Cord, and then connect it to AC Inlet as shown in figure (2).
(3) Fit the Cord Clamp to AC Cord, and fix it by attached screw as shown in figure (3)-1, 2 and
3.
(4) Carefully replace the Main Body Unit in upright position as shown in figure (4).
(1)
AC Inlet
(3)-2
Note:
3 types of Clampers for fixing AC Cord are enclosed in Carton Box of Main Unit.
Select 1 type of Clamper according to diameter of AC Cord.
Confirm the AC Code doesn't move after fixing the AC Code with the clamper.
Standard Configuration List for AC Cord and Clamper
Model No.
JS-950KT-UH0
JS-950KT-UM0
JS-950KT-A10
JS-950KT-E10
JS-950KT-F10
JS-950KT-K10
JS-950KT-W10
JS-950KT-Z10
(2)
(3)-3
Clamper type
PC-3 ø5.6
PC-03C ø6.9
PC-3 ø5.6
PC-03C ø6.9
PC-03C ø6.9
PC-03C ø6.9
PC-03C ø6.9
PC-03C ø6.9
(3)-1
(4)
10