Panasonic JS-960WP Serie Instrucciones De Operación página 36

Fingerprint Sensor Kit Installation
(7) Attach the fingerprint unit to the bottom case.
p Make sure that unit is attached at the correct position.
(8) Arrange the cable inside the cable guide of the bottom case.
(9) Install the inside component which was removed in step (4), and secure it using the
screws (2 locations).
p Take care not to pinch the cable.
p Attach the EMI cover in such a way that it is on the outside of the connector.
(7)
(8)-3
(9)-3
EMI cover
36
(8)-1
(9)-1
(8)-2
(9)-2
Screws