TO OPEN DOOR PANE L:
E
Step 1: Squeeze 2 buttons on handle and lift up. (Figure E).
Step 2: Lift door panel up to disengage lower hinge from adjacent end
panel and swing entire panel open (Figure F).
F OU R PAN E L GAT E S E TUP:
Important: Do not remove panels
connected to door panel.
Note: Loosen adjustment knobs on
panels being removed.
Step 1: Place hand next to loosened
adjustment knob. Apply downward
pressure and flex panel to disengage
top hinge. Pull up to disengage
bottom hinge. Repeat to remove other
panel.
Step 2: Connect panels by following same technique in Step 1 above.
Step 3: Tighten all adjustments knobs by repeating Step 4 in the "Six
Panel Gate Setup" Section.
EIGH T PANE L GAT E S E TUP:
Step 1: To add additional panels to gate,
contact our Customer Service Department to
order #07270 - 2 additional gate panels.
Step 2: Attach panels to main gate by repeating
Steps 1, 2 and 3 in similar method to "Four Panel
Gate Setup" Section.
F
H
G
3