Cleaning And Care - Unold Premium 87705 Manual De Instrucciones

cleanIng anD care

1. Switch the appliance off using the „EIN/
AUS" [ON/OFF] switch.
2. Never immerse the appliance or the lead
cable in water or other liquids to clean
them. Make sure that no water penetrates
the casing of the appliance.
3. Never clean the appliance and the acces-
sories in the dishwasher.
4. Do not use any scrubbing sponges, abra-
sive agents, steel wool, metal objects,
disinfectants or hot cleaning agents, since
they can damage the appliance.
5. Clean the appliance with a soft, damp cloth.
cleaning of the attachments
6. Switch the appliance off.
7. Open the beard trimmer attachment by
pushing it carefully backwards.
8. Clean the shaving head and the inside of the
appliance with the brush provided.
9. Please do not knock the shaving head as
this may damage it.
10. Rinse the shaving head with lukewarm water
drying it thoroughly with a soft lint free cloth
afterwards.
11. In order to eliminate residual moisture we
additionally recommend to dry the shaving
head with a hair dryer (medium temperature
adjustment).
12. Put a drop of sewing machine oil onto the
shaving head and remove excessive oil with
a lint free cloth.
13. Reattach the shaving head to the appliance
by softly pushing it onto the appliance. Make
sure that the shaving head latches into place
properly before using the appliance again.
14. The nose and ear trimmer attachment can
also be detached. Clean it as the beard
trimmer attachment and let it dry completely
before using it again.
15. Protect the appliance from dust.
16. Depending on the frequency of usage, the
shaving head has to be replaced regularly,
but at the latest after two years. Specialist
shops and our after-sales service offer the
corresponding
corresponding order form can be found on
page 41.
replacement parts. The
13