Maintaining:
After using the machine, please take care of the following steps:
1. Pull out the power plug.
2. pull off the water inlet hose
Cabinet care:
-
To clean the cabinet off the water and dirt with soft cloth, no detergent, volatile and other chemicals
used to avoid surface destroying.
Cleaning the lint filter
-
While pressing down on the button, pull the lint filter out.
-
Turn the filter net inside out and rinse with water.
-
After Cleaning, insert edge of filter into place while pressing
the button down.
Cleaning dirty drain valve:
-
Take off the overflow filter cover, loose the belt and screw off the valve cover in counter-clockwise, to
take valve rod and other parts out then remove dirt inside.
-
Reverse the above steps to make all parts reverting.
Freezing prevention:
1. Turn off the water faucet, pull off the inlet hose and empty all water from the inlet hose.
2. Put down drain hose and switch the indicator to " drain " position to empty all water from wash tub.
3.
If Freezing happens to:
1. Put the inlet hose in warm water of 50ºC.
2. Have about 2 liter or warm water less than 50ºC into the wash tub for 10 minutes.
3. Install inlet hose and turn on the water faucet to ensure inlet and outlet of water are working normally.
How about laundry clothing outside of spin-dryer:
1. Loose all of the screws around fame.
2. Pull up frame by two hands.
3. Take out the laundry clothing from the outside of spin-dryer.
4. Press down the frame to make it reverting.
5. Screw all of screws
P-6