ASROCK H410M-ITX/ac Manual De Instrucciones página 21

Serial ATA3 Connectors
(SATA3_0:
see p.1, No. 11)
(SATA3_1:
see p.1, No. 10)
(SATA3_2:
see p.1, No. 13)
(SATA3_3:
see p.1, No. 12)
USB 2.0 Header
(9-pin USB_3_4)
(see p.1, No. 15)
USB 3.2 Gen1 Header
(19-pin USB3_3_4)
(see p.1, No. 9)
Front Panel Audio Header
(9-pin HD_AUDIO1)
MIC2_L
(see p.1, No. 19)
MIC2_R
Vbus Vbus
Vbus IntA_PB_SSRX-
IntA_PA_SSRX- IntA_PB_SSRX+
IntA_PA_SSRX+ GND
GND IntA_PB_SSTX-
IntA_PA_SSTX- IntA_PB_SSTX+
IntA_PA_SSTX+
GND
GND IntA_PB_D-
IntA_PA_D- IntA_PB_D+
IntA_PA_D+ Dummy
1
1
GND
PRESENCE#
OUT2_R MIC_RET
J_SENS E
OUT2_L
OUT_RET
These four SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
* If M2_1 is occupied by
a SATA-type M.2 device,
SATA3_0 will be disabled.
There is one USB2.0
header on this
motherboard. This USB
2.0 header can support
two ports.
There is one header on
this motherboard. This
USB 3.2 Gen1 header can
support two ports.
This header is for
connecting audio devices
to the front audio panel.
H410M-ITX/ac
17