Troubleshooting - Medion MD 90320 Manual De Instrucciones

2. On the General tab, uncheck all items listed under Selective startup (make sure that Selective startup is
selected).
3. Hit apply and OK and restart Windows. This starts Windows with only the basics running; Insures nothing
will interfere with ScanDisk and Defragmenter.
4. Run ScanDisk and Defrag.
5. Go to Start->Run and type msconfig in the Open: box. Select Normal Startup.
6. Restart Windows.

Troubleshooting

PROBLEM: Windows stops responding when I disconnect the external hard drive.
ANSWER: This may occur because Windows is trying to access a file that is on external hard drive. Make sure that
none of the files on the disk are open when you unplug the drive. Be sure to stop the drive before disconnecting the
power or adapter cable to prevent any data loss.
PROBLEM: The drive is not recognized by my computer.
ANSWER: Restart your computer.
PROBLEM: The hard drive does not seem to have as much storage capacity as I allocated.
ANSWER: Check that your operating system and file system support the desired amount.
PROBLEM: ScanDisk reports an unrecoverable error.
ANSWER: The Scandisk program tests drives for errors. If ScanDisk finds a problem and is unable to fix it, there may
be a problem with the hard disk
16 English