If your wireless service provider supports this feature, then location info sharing allows
the phone to share position information over the network. For calls to emergency
numbers, this position information may be used by the emergency operator to
determine the position of the phone. The functionality of this feature is dependent
on the network, satellite systems, and the agency receiving the information. It may
not function in all areas or at all times.
At the start screen, select Menu > Settings > Call settings > Location info sharing >
Emergency or On > OK > OK.
Emergency—This is the phone default profile. The phone's location information
is shared only during an emergency call to the official emergency number
programmed into your phone. The phone screen displays
hand corner of the start screen.
On—The phone location information is shared with the network whenever the
phone is powered on and activated. The screen displays
hand corner of the start screen.
Note: Location information will always be shared with the network during
emergency calls to the official emergency number programmed into the
phone, regardless of which setting is selected. After placing an emergency
call the phone remains in emergency mode for five minutes. During this
time, the location information will be shared with the network. For more
information, see "Emergency calls" on page 74
Anykey answer
Anykey answer allows you to answer an incoming call by briefly pressing any key
except the power key, Left selection key, Right selection key, or End key.
At the start screen, select Menu > Settings > Call settings > Anykey answer and
press Select > On or Off and press Select.
Automatic redial
Occasionally, your network may experience heavy traffic, resulting in a "fast" busy
signal when you dial. With automatic redial activated, your phone redials the
number up to 10 times, and notifies you once the network is available.
At the start screen, select Menu > Settings > Call settings > Automatic redial >
On or Off and press Select.
Activate 1-touch dialing
You can activate or deactivate 1-touch dialing. For more information, see "Set up
1-touch dialing" on page 17.
Automatic update of service
Your phone is capable of receiving updates to wireless services sent to your phone
by your service provider.
At the start screen, select Menu > Settings > Call settings > Automatic update
of service > On or Off and press Select.
.
38
in the upper left
in the upper left
Copyright © Nokia 2003