Panini Vision X Manual Del Operador página 32

6. To reinstall the U-track insert the two teeth "C" in the rail "D", and align the U-track. Push back the U-track
until the lever "E" locks the unit in place. Make sure that the pin "B" is inserted in the receptacle "A".
A
Note: If the blotting pad housing assembly (A)
comes away from the U-track, insert the low Mylar
spring in the lateral slots (B) and the pad housing
in the reference pins (C). Gently press down until
the pad housing stops on the top of the U-Track
wall.
B C
OPERATOR MANUAL Page 31 Maintenance