Towing Products 26102 Instrucciones De Instalación página 8

Directions for installing the rivet nut in a
Tube Frame
1. Place the dual cam bracket on the
frame at the correct spot for your
installation.
2. Use the long ½" bolt to clamp the
bracket in position.
3. Using the holes in the bracket as a
guide, drill two 7/16" holes into the
frame.
4. Remove the bracket and drill the
holes out to 11/16". Do not ream out
the hole. This needs to be a snug fit.
5. Put the Rivet Nuts into the holes in
the frame.
Rivet
Nut
6. Place the bracket over the rivet nuts,
thread the ½-13 x 1-1/2 hex head
bolts with lock washers into the holes.
7. Tighten the long ½" bolt against the
frame, ½ turn after contact with the
frame.
8. Tighten the ½" bolts on the outside of
the frame.
9. Torque to 75 ft. lbs.
©
2010 Cequent Performance Products, Inc.
Installation Instructions
REESE Dual Cam HP
High-Performance Sway Control
Sheet 8 of 33
Rivet nuts
½" hex head bolts
with lock washers
26102IN 04/29/14
Long ½"
bolt
Rev. K