Descargar Imprimir esta página

Webasto Hollandia 900 Instrucciones De Mantenimiento página 4

Ocultar thumbs Ver también para Hollandia 900:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

4
You are supplied three sections of film, one
40" / 1016 mm in length x 4" / 101 mm wide
and two 22" / 559 mm in length x 4" /
101 mm wide.
One section will be applied to the front edge of
the sunroof; the two shorter pieces (two 22" /
559 mm pieces) will be applied to the sides of
the sunroof.
Dependent on the sunroof model the 40" /
1016 mm section applied to the front edge of
the sunroof will need to be cut down to prop-
erly match the width of the model sunroof.
Refer to the upcoming model legend to front
proper film lengths.
Sunroof Models / Cut Length legend
H930 = 36" / 914 mm
H935 = 38" / 965 mm
H940 = 40" / 1016 mm (No cutting is neces-
sary for front section)
5
After cleaning glass and applicable painted
roof surface and ensuring sunroof has been
disabled, apply film to the each side of the sun-
roof. Starting at the rear, apply the film so the
rear edge is approximately 1" / 25 mm to max-
imum 2" / 50 mm behind rear glass. This is
best accomplished with two people. Lay film
from rear to front, centering film on edge trim
as you go. Lay film as flat as possible in order
to eliminate air pockets. Repeat this process on
opposite side.
IMPORTANT: To ensure proper overlap of the
film layers, the sides must to be installed first so
the front film section overlaps the side sec-
tions.
F = front
R = rear.
Kit includes:
1 - 40" / 1016 mm piece of protective film
2 - 22" / 559 mm pieces of protective film
Front Section
Side
F
Start film application 1" / 25 mm to 2" / 50 mm
behind rear glass edge
Side
R
4

Publicidad

loading

Productos relacionados para Webasto Hollandia 900