PLRElectronics e Polaroid Cube Manual De Usuario página 7

Turn the controls cover clockwise to close.
SD Card
A microSD card must be present for your Polaroid
Cube to work. To insert a microSD card, use a
coin or other flat object to turn controls cover
counterclockwise. Insert card into slot and gently
push in until you hear a click. Turn the cover
clockwise to close. To remove a card, gently push
the card in, release and the card will slide back out.
If no microSD card is present, your camera will
continously beep and the LED will blink orange
until a new microSD card is inserted.
When your microSD memory is almost
full (1GB remaining), the LED will blink
12 | EN
alternating orange and red. Once the card is
completely full, the recording will stop and
you'll hear a single short beep. Your camera
will blink orange and red until the microSD
card is removed or data is transfered from
the camera.
Your Polaroid Cube camera can accommodate
microSD cards with storage capacities up to
32GB. We suggest using microSD cards Class
10 and above. Cards lower than Class 6 may
cause slower recording/reading speed as well
as other unexpected issues.
Connect to Your Computer
Insert the included microUSB cable into the
microUSB port and the other end into your
EN | 13