DeLonghi EL Serie Manual Del Usuario página 12

HIGH
MEDIUM
LOW
TEMPERATURE
ORANGE LIGHT: Room conditions far
from optimal level.
GREEN LIGHT: Most people feel good
room conditions, near optimal level.
BLUE LIGHT: Best comfort level.
Perfect!
Perfect!
The well-being feeling is a subjective condition: for this reason,
different people may judge differently the same environmen-
tal conditions. In particularly severe environmental conditions
(high temperature or humidity outside, poor insulation, too
many people, high heat in the room, strong exposure to the sun,
etc...) this device may not be able to reach the best comfort level.
ARCTIC WHISPER
(available in air conditioning mode only)
By activating this function, the operating noise is further re-
duced. To activate, press
The display shows the relative symbol C14/D8.
Operating curve
Perfect!
button on the remote control.
SWING FUNCTION
The SWING button D9 moves the flap, evenly distributing the air
into the room. When the SWING button is pressed, the flap will
begin to move forwards and backwards alternatively. If pressed
again, the flap will be locked into its current position.
Note: in order to avoid damaging the internal mechanisms, the
flap must not be moved manually.
WIFI FUNCTION
To activate or deactivate the WiFi function, keep touching for a
few seconds the WiFi button on the remote control till the emis-
son of a double beep.
Once the WiFi icon is displayed it means that the WiFi features
are available.
SYMBOL WIFI FIXED
it means that the WiFi features are active AND the
"Home WLAN" has been found.
SLOW FLASHING
it means that the appliance is searching for the
"Home WLAN" .
FAST FLASHING
it means that the "Home WLAN" has not been
found or has not been set yet.
"APP CONTROL " ICON
When the APP CONTROL icon appears it means that
the last command has been received via app.
If the memorized "Home WLAN" settings needs to be changed,
proceed as follows:
a) keep touching for about 20 seconds the MODE button C2
on the control panel until a prolonged beep is emitted;
b) use the app to enter the new WLAN settings into the unit.
12