Publicidad
Idiomas disponibles
Idiomas disponibles
cooking surfaces.
- Only counter top protectors designed
for use with the cooking appliance
and listed in the manufacturer's in-
structions should be used as suitable
protection for the counter top incorpo-
rated in the appliance. Use of unsuit-
able protectors may cause accidents.
- WARNING: Accessible parts will be-
come hot when in use. To avoid burns
and scalds children should be kept
away.
Insert in the fixed wiring a mean for
disconnection from the supply mains
having a contact separation in all poles
that provide full disconnection under
overvoltage category III conditions, in
accordance with the wiring rules. The
plug or omnipolar switch must be easily
reached on the installed equipment.
This appliance is not intended to be
used via an external timer or a remote
control system.
The manufacturers decline any respon-
sibility in the event of non-compliance
with what is described above and the
accident prevention norms not being
respected and followed.
To avoid all risk, if the power cable be-
comes damaged, it must only be re-
placed by the manufacturer, by an au-
thorised service centre, or by a qualified
electrician.
User's Instructions
Installation
All operations relative to installation (electric connection)
should be carried out by skilled personnel in conformity with
the rules in force.
As for the specific instructions see part pertaining to install-
er.
Use
TOUCH CONTROL HEATING ELEMENTS
Touch sensitive keys
All operations can be performed using touch sensitive keys
(capacitive sensors) located on the front of the control
board; each key has a corresponding display. All actions are
confirmed by an audible signal.
TOUCH CONTROL (Fig. 2)
1 ON / OFF
2 Minus -
3 Plus +
4 Double / Triple Circuit
5 Cooking zone
6 Setting level display
7 Dual circuit pilot light
Switching the Touch Control on/off
After mains voltage is applied, the touch control initialises
for approximately one second before it is ready for use.
All displays and LEDs flash for approximately one second
after resetting. Once this period is complete, all displays and
LEDs switch off and the touch control is in standby mode.
Press the ON/OFF (1) button to switch the touch control on.
The cooking zone displays indicate "0". If a cooking zone is
in "hot" (high temperature) mode, the display will alternate-
ly indicate "H" and "0".
After switching the touch control on, it will remain active for
20 seconds. If no cooking zone is selected, the touch control
automatically switches back to standby mode.
The touch control can only be switched on by pressing the
ON/OFF (1) button.
Pressing the ON/OFF (1) button at the same time as other
buttons will have no effect and the touch control will remain
on standby.
The touch control can be switched off at any time using the
ON/OFF (1) button. This is even the case when the control
has been locked by the child safety feature.
The ON/OFF (1) button always takes priority in the switching
off function.
Automatic off
Once switched on, the touch control automatically switches
off after 20 seconds of inactivity. After selecting a cooking
zone, the automatic off time is divided into 10 seconds, after
which the zone is deselected and, after another 10 seconds,
the touch control switches off.
Publicidad
