Dimplex DF1135M Manual Del Propietário página 11

Fireplace Installation
Pedestal Installation
Instructions
WARNING: Failure to install
the fireplace as instructed
below may result in damage
to the equipment and or may
expose the user to the risk of
fire, serious injury, illness or
death.
CAUTION: High temperature,
keep electrical cords, drapery,
and other furnishings at least
3 ft (0.9m) from the front of the
heater and away from the side
and rear.
Tools Required
• #2 Phillips screwdriver
1. Carefully lay the fireplace
down on its front.
!
NOTE: If necessary, lay a
protective barrier between the front
glass and your work surface, (i.e.
cloth, cardboard, thick plastic) to
avoid scratching the glass or your
work surface.
2. Assemble the pedestal by
attaching the vertical supports
and firebox support (if appli-
cable) to the base. (Figure 7)
3. Position the pedestal on the
back of the firebox so that
it lines up with the provided
Figure 7
Firebox
Support
Base
Figure 8
Pedestal
mounting holes.
4. Secure the pedestal to the
firebox with the provided
screws. (Figure 8)
5. Orient the firebox so that it is
standing upright.
6. Mount hardware for trim in-
stallation to unit as described
in installation guide provided
with trim.
7. Carefully pour and evenly dis-
Vertical
Supports
11